I have just released two Android apps for use with Kestrel Drop D3 and wit Motion WT901SDCL-BT50 Devices.
These two free apps were designed for use in tandem and with these two devices:
wit Motion WT901SDCL-BT50 (up to three)
and
Kestrel Drop D3 (up to three)
When each device is physically paired with its counterpart device like this,
Pair 1: D3-1 + WTSDCL-1
Pair 2: D3-2 + WTSDCL-2
Pair 3: D3-3 + WTSDCL-3
the paranormal investigator can track 4 environmental conditions (vibration, EMF, temperature, and station/barometric pressure) in three locations simultaneously. When the device pair locations are entered into either app, the location information is automatically synced with the other app. When moving a device pair to another room/location, simply edit the location in one of the apps and it again syncs with the other app.
Recorded environmental data is saved in .ods (LibreOffice Calc) and .csv files in a user-specified folder which can be exported/shared via Bluetooth.
App Requirements: At least one wit Motion WT901SDCL-BT50 and/or one Kestrel Drop D3 (up to three of each).
IMPORTANT SETUP INSTRUCTIONS:
Kestrel Drop D3
!!!IMPORTANT Kestrel D3 SETUP REMINDER!!!
Before active investigation, open the official Kestrel LiNK app and set this for EACH Kestrel DROP D3 device you will use:
Device Sync Rate: 2 sec
This is a per-device setting, not a general app setting.
If any D3 is left at 60 sec, quick temperature drop alerts for that device may be delayed or misleading.
wit Motion WT901SDCL-BT50
It is VERY important that each wit Motion WT901SDCL-BT50 device be properly calibrated before use.
Be sure to follow the instructions in this video to properly calibrate each wit Motion WT901SDCL-BT50 device before using it.
To download the apps and install them, go here.
